S-250 SATA to PATA Converter
Use new SATA storage devices in systems equipped with PATA/IDE. The S-250 bridge board is a converter solution for the Serial ATA Device. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to parallel ATA protocol and sent to the host. The SATA 150 to PATA Converter supports the Serial ATA Generation 1 transfer rate of 1.5GB/s (150MB/s) on the Serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side.
 |
||
|---|---|---|
| Part Number and Description | Price | Add to Cart |
| SATA-PATA-S250 S-250 SATA to PATA Converter | $26.00 |  |
Features and Specifications
- Features
-
- Use new SATA storage devices in systems equipped with PATA
- Compatible with Ultra ATA 133 / 100 / 66 / 33 specifications
- Supports all types of SATA storage devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk...)
- 100% hardware bridge converter to support PC, MAC, Linux, and other environments
- Supports Serial ATA Generation 1 transfer rate 1.5Gb/s
- Compliant with Serial ATA 1.0 specifications
- Warranty Information
-
- 1 Year Limited Warranty
- Connector Type
-
- SATA: 22-pin SATA data and power connector
- PATA: 40-pin IDE connector, plus 4-pin Molex connector
- Protocols/Standards
-
- Ultra ATA-133 and previous standards
- Serial ATA 1.0 (Serial ATA Generation 1 transfer rate 1.5Gb/s)
- System Requirements
-
- PATA (IDE) host connectivity
- Power over 4-pin Molex connector
- Jumper Switch
-
- Allows selection of master or slave for target devices via jumper
- Package includes
-
- 1 x SATA 150 to PATA Converter
- 1 x User Manual
- Approvals
-
- CE Mark, FCC
Alternate View
Alternate View
Alternate View
Alternate View
