FarLinX X.25 Gateway X.25 to XOT and X.25 to TCP/IP Appliance L/HCG

TCP to X.25 XOT Gateway The FarLinX X25 Gateway product range is the third generation of X.25 Gateway products from FarSite, providing a very flexible powerful gateway for your X.25 migration needs at a very affordable cost. It incorporates all the popular features of the previous product ranges with an improved browser interface and new comprehensive set of online statistics, connection logging and status change alert functions to put you in control. The condition of the Gateway can be monitored from a browser with current line status, real time line and data statistics and real time active user activity available. There are also daily activity logs with a selectable level of detail, automatically archived on a daily basis. The SNMP support can provide alerts for a number of different conditions including critical events such as line down and line up. Dual Gateway support is available such that 2 Gateways can share a common IP address to provide automatic switch over support for a range of conditions including X.25 line down and Gateway failure. Any such failures and switchover events will generate SNMP alerts so the network operator can instantly know what's happened.

The product can support protocols when the X.25 Host system treats the incoming X.25 data as a character stream. It can also convert the data when a header is used to describe the message payload within the TCP connections and remove this header on the X.25 virtual circuits. Data types supported include: RFC1006, Cisco RBP and special character delimiting. Dynamic routing is supported where the Client TCP application determines the X.25 address and call parameters used at the time the connection is established. XOT is supported so that the X.25 network can run over the top of an IP network. The Gateway can provide connectivity to several different Host systems at the same time with each can have different data conversion configurations. This Gateway can be used in conjunction with ISODE's X.400 Server's to provide X.400 messaging over X.25.


Part Number and Description	Price	Add to Cart
F-FL2601 FarLinX X.25 Gateway-1 X.25 to XOT and X.25 to TCP/IP Appliance LCG X.25 Lines 1	$2,930.00
F-FL2602 FarLinX X.25 Gateway-2 X.25 to XOT and X.25 to TCP/IP Appliance L/HCG X.25 Lines 2	$3,128.00
F-FL2604 FarLinX X.25 Gateway-4 X.25 to XOT and X.25 to TCP/IP Appliance L/HCG X.25 Lines 4	$4,554.00
F-FL2608 FarLinX X.25 Gateway-8 X.25 to XOT and X.25 to TCP/IP Appliance L/HCG X.25 Lines 8	$6,530.00
SOFTWARE UPGRADE
F-FL2610 POS Software Upgrade for FarLinX 26xx Gateway Range with ISO 8583, APACS, SIBS	$1,980.00
AVAILABLE CABLES
F-FS6061-UCR1 Single RS232C (V.24) cable 1.5M	$54.00
F-FS6063-UCV1 Single V.35 cable 1.5M	$68.00
F-FS6062-UCX1 Single X.21 (V.11, RS422) cable 1.5M	$54.00
F-FS6095-UX35C Single X.35 DCE (use when card needed to generate line clock) cable 1.5M	$90.00
F-FS6064-U530 Single EIA-530 (RS-530) cable 1.5M	$68.00
SPECIAL PURPOSE CABLES
F-FS6090-NULLMX X.21 Double Shielded Crossover cable 15 pin D type female connectors 0.5M	$90.00
F-FS6091-X21EXT X.21 Double Shielded 15 meter extension cable 15 pin D type female to 15 pin D type male connector	$162.00
F-FS6092-NULLMR3 V.24 (RS232C) Double Shielded crossover cable 25 pin D type female connectors 0.5M	$90.00
F-FS6093-X21449INT X.21 to RS449 Conversion Cable for clock generated by FarSync card 0.5M	$90.00
F-FS6094-X21449EXT X.21 to RS449 Conversion Cable for clock generated externally (DCE Clock) 0.5M	$90.00

Features and Specifications

CE Mark

Features

See either the FarSite W3 Page or PDF datasheet for both hardware and operating system specific features for this device
FL2601: X.25 to XOT and X.25 to TCP/IP Appliance LCG 1 X.25 Line
FL2602: X.25 to XOT and X.25 to TCP/IP Appliance L/HCG 2 X.25 Line
FL2604: X.25 to XOT and X.25 to TCP/IP Appliance L/HCG 4 X.25 Line
FL2608: X.25 to XOT and X.25 to TCP/IP Appliance L/HCG 8 X.25 Line
1U Rackmount Form Factor

Warranty Information