FarLinX TCP-X25 GP Gateway TCP to X.25 General Purpose Gateway Appliance

TCP to X.25 GP Gateway The FarLinX TCP-X25 GP Gateway provides a very reliable solution for inter-connection of applications between TCP/IP and X.25 networks. Key Features: General Purpose TCP to X.25 data translation with a very wide variety of modes including: fixed routes, dynamic routing, RFC1006, Cisco RBP compatibility, header stripping and parity correction; High performance, non stop operation - up to 1000 messages per second; 3 Models, equipped with 1, 2 or 4 X.25 lines, and up to 4000 SVC and PVC connections; Switching of X.25 connections between X.25 lines and routing over TCP; Multiple Gateways providing Resilience with Load Balancing; Simple configuration with a Web accessible Configuration Application. The Gateway operates as a general purpose means for connecting a variety of different TCP/IP equipment to X.25 services. Similarly, the Gateway can also inter-connect existing legacy terminals attached to an X.25 network to Host systems with TCP/IP interfaces. An X.25 switch function is also included in the 2 and 4 line models.

The product can support protocols when the X.25 Host system treats the incoming X.25 data as a character stream. It can also convert the data when a header is used to describe the message payload within the TCP connections and remove this header on the X.25 virtual circuits. Data types supported include: RFC1006, Cisco RBP and special character delimiting. Dynamic routing is supported where the Client TCP application determines the X.25 address and call parameters used at the time the connection is established. The Gateway can provide connectivity to several different Host systems at the same time with each can have different data conversion configurations. The Gateway also support X.25 Data Switching over TCP this allows X.25 devices to be interconnected via an IP network without the layer 3 overheads associated with XOT. Up to 2048 transactions can be handled simultaneously over each X.25 line. There are 3 versions of the Gateway providing scalable solutions, starting with the entry level GP Gateway-1 version supporting up to 254 simultaneous connections with 1 X.25 line to the GP Gateway-4 version allowing up to 4,000 connections over 4 X.25 lines. Two or more Gateways can be used in a load balanced, resilient configuration that has no single point of failure.

Follow @synchrotech_inc


Part Number and Description	Price	Add to Cart
F-FL2400 FarLinX TCP-X25 GP Gateway-1 TCP to X.25 General Purpose Gateway Appliance 1 X.25 Line	N/A
F-FL2402 FarLinX TCP-X25 GP Gateway-2 TCP to X.25 General Purpose Gateway Appliance 2 X.25 Line	N/A
F-FL2404 FarLinX TCP-X25 GP Gateway-4 TCP to X.25 General Purpose Gateway Appliance 4 X.25 Line	N/A
AVAILABLE CABLES
F-FS6061-UCR1 Single RS232C (V.24) cable 1.5M	$64.00
F-FS6063-UCV1 Single V.35 cable 1.5M	$82.00
F-FS6062-UCX1 Single X.21 (V.11, RS422) cable 1.5M	$54.00
F-FS6095-UX35C Single X.35 DCE (use when card needed to generate line clock) cable 1.5M	$107.00
F-FS6064-U530 Single EIA-530 (RS-530) cable 1.5M	$82.00
SPECIAL PURPOSE CABLES
F-FS6090-NULLMX X.21 Double Shielded Crossover cable 15 pin D type female connectors 0.5M	$107.00
F-FS6091-X21EXT X.21 Double Shielded 15 meter extension cable 15 pin D type female to 15 pin D type male connector	$186.00
F-FS6092-NULLMR3 V.24 (RS232C) Double Shielded crossover cable 25 pin D type female connectors 0.5M	$89.00
F-FS6093-X21449INT X.21 to RS449 Conversion Cable for clock generated by FarSync card 0.5M	$107.00
F-FS6094-X21449EXT X.21 to RS449 Conversion Cable for clock generated externally (DCE Clock) 0.5M	$107.00

Features and Specifications

CE Mark

Features

See either the FarSite W3 Page or PDF datasheet for both hardware and operating system specific features for this device
FL2400: General Purpose Gateway Appliance 1 X.25 Line
FL2402: General Purpose Gateway Appliance 2 X.25 Line
FL2404: General Purpose Gateway Appliance 4 X.25 Line
1U Rackmount Form Factor

Warranty Information