Bafo USB to 10/100Base-TX RJ-45 Ethernet Adapter
Bafo's USB to 10/100Base-TX Ethernet Adapter allows simple connections to Ethernet networks without the need to install a PCI or PC Card NIC. This plug and play device auto senses network connections and provides about 10Mbps (megabits) transfers over 10 or 100 Base connections. The Ethernet port accepts a standard RJ-45 connector from the network. The single type B USB port connects the adapter directly to an USB host computer or a host's downstream USB Hub. The bus powered adapter plugs into any USB host or hub port providing 500mA of current and supports energy saving suspend and resume functions to minimize power consumption. Drivers are included for Windows 98 and later, and the device supports all standard networking protocols. Backed by Synchrotech's one year limited warranty and highly trained technical support, the only thing you will have to worry about is finding new uses for the adaptor!
 |
||
|---|---|---|
| Part Number and Description | Price | Add to Cart |
| USB-EIO-B01 Bafo USB to 10/100Base-TX RJ-45 Ethernet Adapter | $29.99 |  |
| LAN/ETHERNET CAT 5 CABLES | ||
| CAB-LAN-C5-0100C CAT5e Enhanced Networking Cable RJ45 Black 1M/3F | $4.50 | |
| CAB-LAN-C5-0200C CAT5e Enhanced Networking Cable RJ45 Black 2M/7F | $5.50 | |
| CAB-LAN-C5-0400C CAT5e Enhanced Networking Cable RJ45 Black 4M/14F | $6.50 | |
| CAB-LAN-C5-0750C CAT5e Enhanced Networking Cable RJ45 Black 7.5M/25F | $7.50 | |
Features and Specifications
- Features
-
- Fully 10-BaseT compatible
- No need to install an internal Network Interface Card (NIC)
- Connect any USB enabled computer to the network in minutes
- Allows notebook users without available PC Card slots to connect to networks
- Network using IEEE 802.3 standard Ethernet or IEEE 802.3u Fast Ethernet
- Supports wakeup frame, link status change and magic packet wake-up
- Supports USB suspend/resume detection logic
- USB specifications 1.0 and 1.1 compliant
- System Requirements
-
- Windows 98, 98SE, Millennium Edition, 2000, or XP
- PC with 486DX4-100 MHz or better
- Available USB port
- At least 16MB RAM
- CD-ROM drive
- Standards
-
- IEEE 802.3 Ethernet
- IEEE 802.3u Fast Ethernet (10% approximate utilization)
- USB Specifications version 1.0, 1.1
- OHCI, UHIC
- Electrical Characteristics
-
- Operational Voltage: DC +5 Volts @ 500mA direct from USB
- Ports
-
- One upstream (USB Type B receptacle)
- One RJ-45 (Dual Speed port)
- Diagnostic LEDs
-
- Power
- Link Type 10/100 (Ethernet RJ-45 Port)
- Link Up (Ethernet RJ-45 Port)
- Traffic (Ethernet RJ-45 Port)
- Environmental Characteristics
-
- Operating Temperature: 0 to 70°C
- Operating Humidity: 10 to 90% non-condensing
- Certifications
-
- Compliances: CE, FCC Class B
- Package Includes
-
- USB 10/100BaseT RJ-45 Ethernet Adapter
- 6 foot USB A to B cable
- CD-ROM with drivers
- User manual
